Plastmodeller




Plastmodeller & byggmodeller! Plastmodeller eller byggmodeller som många kallar det, har funnits i många år. Här kan du välja bland ett av Nordens största sortiment av plastmodeller. Du väljer själv vilka modeller du vill visa genom att klicka på de olika kategorierna till vänster. Ex: Visa alla byggmodeller i skala 1:72 från andra världskriget. Eller så kan du sortera fram alla plastmodeller som är flygplan från Revell. Kombinera som du vill för att hitta dina favoriter bland alla plastmodeller och byggmodeller.
-
Apollo: Spacecraft & Interior 1:32
The Apollo spacecraft that carried the astronauts to the moon consisted of 2 components: the command module and the service module. The command module consisted of the accommodation/cockpit section for the 3 astronauts and extensive electronic communication systems. The oxygen and power were supplied from the service module that also contained the main power plant, to enable the lunar orbit to be reached and also to provide the thrust for the return to Earth. The command and service modules were coupled together throughout the mission, that is on the journeys both to and from the moon. Only a few minutes before entry into the Earths atmosphere the command module was separated from the service module. The command module alone returned to Earth and landed safely on parachutes in the Pacific.
The set includes four paints for the basic decoration, a two-sided paintbrush and Revell Contacta Professinal Mini.
Model-details:
- Command module with detailed interior
- Inner walls with decals for instrument panel and display screens
- 3 astronaut figures
- Detailed seats
- Transparent outer section gives a view into the cockpit
- Oxygen tanks and heat shield
- Docking ring with coupling mechanism
- Service module with transparent outer section
- Clamping segment with fuel cells, oxygen tanks, hydrogen tanks and large tank container
- Internal mechanism for the movable main control jet
- Antennae holders with reflectors
- 4 control jet brackets
- Display stand
- Decals for exteriorSkala 1:32
Innehåller:83 delar
Längd: 324 mm
Svårighetsgrad: Avancerad
Art nr: MR04829Denna modell levereras omålad.
För att måla den rekommenderar vi Revells färger nr: 89 91 301 302Original details Type description Spacecraft Year/Period 1962-1969 Origin USA Speed 97,8 kn 649,00 kr -
BAe Hawk T.1 Red Arrows 1:32
Innehållet i denna byggsats monteras ihop till en BAe Hawk T.1 Red Arrows.
Svårighetsgrad: medel
Längd: 362 mm
Vingbredd: 299 mm
Antal Delar: 290 st349,00 kr -
Beaufighter MK.X 1:72
Skala 1:72
Innehåller: 50 delar
Längd: 175 mm
Vingbredd: 243 mm
Svårighetsgrad: Medel
Art nr: MR04290189,00 kr
-
Dornier Do 27 Safari 1:32
Manfred von Richthofen, the "Red Baron" and his red Fokker triplane made history in the Great War. Introduced to the western front in June 1917, the General Staff released the Fokker Dr. I only after an extended test phase and following approval by the flying ace Manfred von Richthofen. The Dr. I was the most manoeuvrable of all the aircraft deployed at the time and achieved high climbing speeds. The Oberursel radial engine (power output 110 PS) gave the Dr.I a maximum speed of 193 km/h and enabled it to climb to 3000m in six minutes. Two Spandau MGs were installed forward of the cockpit.All the pilots in Richthofen's group flew red triplanes. Although the Dr.I was withdrawn from the western front at the end of 1917, the Red Baron continued to fly this type to bring down a total of 80 enemy planes before being shot down himself in April 1918.
Här kan du köpa ett flygplan Fokker Dr. I Richhof från spelmedposten.se Skala 1:32 Innehåller: 6 delar Längd: 211 mm Vingbredd: 262 mm Svårighetsgrad: medel Art nr: MR04745 Färg att köpa till: 4, 88, 99, 302, 365, 374
329,00 kr -
Eurocopter EC 135 Polis 1:32
Denna låda innehåller modelldelar som blir en helikopter ihopsatt 330 mm lång.
Rotorns diameter: 316 mm
Antal delar: 150
Art Nr MR 04484298,00 kr -
Eurofighter Typhoon & Full Engine 1:32
Här kan du köpa ett flygplan Eurofighter Typhoon & Full Engine från spelmedposten.se
Skala 1:32
Innehåller: 391 delar
Längd: 498 mm
Vingbredd: 349 mm
Svårighetsgrad: svår
Art nr: MR04783
Färg att köpa till:9, 45,55,91,99,301, 371,374Välkommen till spel med posten!
995,75 kr
-
Ferrari 360 Challenge M.Lehner 1:32
In addition to Formula 1 engagements, the Scuderia Ferrari racing sports department also operates the Corsi Clienti as a racing sports series for customers. Their most exclusive racing series is the Ferrari F360 Challenge that has been held since 1993. This is split between the Pirelli Trophy and the Shell Cup. Although none of the drivers in the Shell Cup can be professional pilots, like them most of these have a great deal of talent and experience, because the same excellent reactions and concentration are required. On 2003, Markus Lehner, a successful businessman, took the title convincingly, in only his second year in this demanding racing series, with a total of 194 points to become the European Champion in his class. His Ferrari 360 Challenge, with over 400 bhp, reaches a top speed of over 300 km/h and accelerates from 0 - 200 km/h in just 10 seconds.
Skala 1:32
Innehåller:28 delar
Längd140 mm
Svårighetsgrad: Ganska lätt
Art nr: MR07138Original details Type description Ralley-car Year/Period 2000 Origin I Engine capacity 400 hp Engine V8-engine Displacement 3,6 litre Speed 296 kph Weight 1.170 kg 119,00 kr -
Ferrari 360 Challenge Norbert 1:24
The Ferrari Challenge racing series was inaugurated in 1993. In 1999 Michael Schumacher introduced the new Ferrari 360 Modena Challenge which would run in the Challenge from 2000. The customer racing sports series offers modern motor sport at the highest level and brings together Ferrari pilots from 10 different European countries. Norbert Graf has participated in the Ferrari Challenge since 1996. Born in M�lheim, he can look back on a long motor sports career. Since the middle of the eighties he has gained a great deal of experience in long distance races with the BMW M3 with which he had appropriate successes. From 1993 onwards he took part in the FIA-GT championships. In 2001 this building contractor won the European title in the Ferrari Challenge class for experienced drivers, the Pirelli trophy. In 2003, racing for the Saggio team from W�rzburg, he took second place in the German championship and in the Pirelli trophy he scored 135 points in the overall standings. .
Skala 1:32
Innehåller: 28 delar
Längd: 140 mm
Svårighetsgrad: Ganska Lätt
Art nr: MR 07137Välkommen till spelmedposten!
198,00 kr -
Glider LS-8t (with engine) 1:32
Innehållet i denna byggsats monteras ihop till en Glider LS-8t (with engine) .Art Nr MR04273
Svårighetsgrad: medel
Längd: 207 mm
Vingbredd: 559 mm
Delar: 48 st
Skala: 1:32229,00 kr
-
Glider Plane Schleicher ASK 21 1:32
The ASK 21 is the most produced and most successful training glider in the world, manufactured by the company Alexander Schleicher. Worldwide, it is one of the most favoured training aircraft in the gliding sector, also due to its broad range of uses including stunt, training, overland and competition flying. Thanks to its low all-round weight, a higher towing level is reached when winch launching, compared to similar double-seaters, which allows for improved thermals. Serviceability, good flight characteristics and a solid build typify the 280 kilometre/hour fast ASK 21. Glass fibre synthetics are used in the centre deck section and T-tail, offering enormous bearing strength. The ASK 21 is capable of sustaining extreme loads of 4 to 6.5 Gs as a result. These values allow for a wealth of stunts to be performed, even including loopings.
Model-details:
- New kit mould
- detailed tail and wings
- separate side rudder and elevator
- 3 moveable wheels
- highly detailed double-seater cockpit
- moveable pulpit canopy
- cockpit floor with steering columns
- seat elements with belt imitation
- detailed instrument panel
- lever and microphone imitation
- super decals with various German markings, a Swiss, Austrian, French and Belgian version plus USAF and RAF markingsSkala: 1:32
Innehåller:50 delar
Längd:258 mm
Vingbredd:529 mm
Svårighetsgrad: Medel
Art nr: MR04224
Denna modell levereras omålad.
För att måla den rekommenderar vi Revells färger nr: 4 31 56 314 371 374Original details Type description Aerobatic two-seat trainer Year/Period 1979/2001 Origin D Speed 280 kph 169,00 kr -
Heinkel He162A-2 "Salamander" 1:32
Det här en byggmodell som föreställer flygplanet Heinkel He162A-2 "Salamander".269,00 kr -
Medicopter 117 1:32
They are emergency medics body and soul - when they are needed they will be there. The air ambulance rescuers aboard Medicopter 117 - Every Life Counts do not fly routine missions. The helicopter teams are called out when every second counts - seconds that mean the difference between life and death. The location for the action series is the fantastic alpine scenery between Munich and Salzburg. Breath-taking flying manoeuvres, spectacular rescues and a team of doctors working against the clock. The series is centred on two air ambulance crews and a helicopter. Emergency doctors, paramedics and pilots fly their missions risking life and limb - and must therefore demonstrate full emotional and professional competence. The Medicopter is a BK-117. This helicopter is made by the German/French firm Eurocopter in Donauwörth and is one of the most popular multi-purpose helicopters in the world.
Model-details:
- Structural details on surface
- Cockpit with instrument panel
- Detailed internal cabin with separate side walls and roof
- Seats for emergency doctors and paramedics
- Oxygen cylinders and on-board equipment
- Rescue stretcher with wheeled trolley
- Detailed winch
- Movable main and tail rotors
- Tail section with side fins
- Detailed decals for the Medicopter 117 versionSkala: 1:32
Innehåller:126 delar
Längd:306 mm
Rotor diameter:339 mm
Svårighetsgrad: Ganska avancerad
Art nr: MR04402
Denna modell levereras omålad.
För att måla den rekommenderar vi Revells färger nr: 9 12 31 302 371 374Original details Type description Rettungshelikopter Year/Period 1979 Origin D Engine capacity 2 x 410 kW Speed 278 km/h 179,00 kr
-
Mercedes C-Klasse DTM 220-SE 1:32
En modell av Mercedes Benz C-klasse som ansågs av Mercedes som deras finaste sedan under åren 1959-1968Pilots & Ground Staff Luftwaffe WWII German pilots showed their aptitude for air combat in many missions during WorldWar II. The kit contains Luftwaffe fighter and bomber crews from the years 1935-1945. There are mechanics in addition to seated pilots to place in the cockpit and standing pilots to place outside the aircraft. The figures are compatible with 1:72 scale models of aircraft. The sizes are varied to enable the figures fit in different cockpits.
Denna modell levereras omålad. För att måla den rekommenderar vi Revells färger nr: 9, 35, 56, 79, 84, 90, 302
469,00 kr -
MiG-29UB/GT Twin Seater 1:32
Det här en byggmodell som föreställer flygplanet MiG-29UB/GT Twin Seater.599,00 kr -
Piper PA-18-150 FLOAT PLANE 1:32
The Piper Super Cub is without doubt the best known aircraft made by this firm. It is based on the J-3 Cub made in 1937 and the improved J-4 Coupe that was superseded by the PA-18-95 and given the name Super Cub. A total of 40,000 aircraft were built in the Cub and Super Cub range. That makes it the most built aircraft of its class. The PA-18-150 was an upgraded version with new engines. There was immediately great demand for a floatplane version, in particular interest in a floatplane with an integral undercarriage for amphibian purposes. It was very popular in Canada and the USA and also in many European countries such as the Netherlands and Switzerland. The model has the large 150 hp engine with cowling and detailed and detailed float pods with undercarriage components. The 2nd wing tank is also included.
Model-details:
- Detailed 150 hp engine
- large propeller
- float struts
- detailed floats showing structural rivets
- undercarriage optionally extended or retracted
- oneemergency paddle
- wings with inscribed 2 tanks
- surface details shown with recessed panel lines and material texture
- detailed cockpit with 2 seats
- separate entrance hatch
- filigree mesh effect in cockpit area
- true-to-original representation of cockpit glazing
- decals for 2 versions, one Dutch and one SwissSkala 1:32
Innehåller:102 delar
Längd: 231 mm
Vingbredd: 336 mm
Svårighetsgrad:Ganska avancerad
Art nr: MR04698Denna modell levereras omålad.
För att måla den rekommenderar vi Revells färger nr: 4 91 330 374Original details Type description Float Plane Year/Period 1949 Origin USA Engine capacity 92-110 kW Speed 209 km/h 298,00 kr
-
Segelflygplan Duo Discus 1:32
Skala 1:32 Innehåller: 50 delar Längd: 268 mm Vingbredd: 624 mm Svårighetsgrad: Medel Art nr: MR04266279,00 kr -
Westland SEA LYNX Mk.88A 1:32
Det här en byggmodell som föreställer helikoptern Westland SEA LYNX Mk.88A.359,00 kr







